Protek 3110 100mhz, 1gas/ s Sampling Rate Digital Storage Oscilloscope

Protek 3110 100mhz, 1gas/ s Sampling Rate D Storage Oscilloscope Feature 1. 100 MHz Bandwidth with 2 Channels 2. 1GSa Real-time Sampling Rate 3. 25GSa/ s Equivalent-Time Sampling Rate 4. Large 7-inch Color Display 5. Record Length up to FFT 6. Multi-Languages Support 7. USB Host and Device Connections Specifications Vertical Specifications a) Channels : 2 b) Bandwidth : 100 MHz c) Rise Time : 3.5ns ( Approx.) d) Input Impedance : Resistance: 1 M + / - 2% ; Capacitance : ( 20+ / -5) pF e) Polarity : Normal & Invert f) Maximum Input : 400V ( DC + AC Peak) g) Waveform Signal h) Process : CH1 + / - CH2, CH1 x CH2, CH1/ CH2, FFT i) Bandwidth Limit : 20MHz + / -% Typical Horizontal Specifications a) Sampling Rate : 1GSa/ s; Equivalent Max. Sampling Rate is 25GSa/ S for all Times b) Range ( 1 - 2 - 5 Increments) : 50s/ div ~ 5ns/ div c) Mode : Main Sweep, Main Sweep + Delay Expansion Sweep, X-Y Trigger Specifications a) Source : CH1, CH2, EXT., EXT/ 5, AC Line b) Mode : Auto, Normal, Single c) Trigger Sensitivity : 1. DC: CH1/ 2 ( typical) 1 Div from DC to 10MHz; 1.5div from 10MHz to full 2. EXT ( Typical) : 200mV from DC to 40MHz 3. EXT/ 5 ( Typical) : 1V from FC to 40MHz 4. AC: Attenuates signal below 10Hz 5. HF Reject: Attenuates signals below 15kHz 6. LF Reject: Attenuates signals below 150 kHz 7. Noise Reject: Reduces trigger sensitivity d) Trigger Level Range : CH1, CH2: + / - Division from center of screen; EXT: + / - 1.2V; EXT/ 5: + / - 6V e) Trigger Level Accuracy ( Accuracy is for signals having rise and fall time at max 20ns) : CH1, CH2: + / -( 0.3div x V/ div) ( within + / -4 Division from center of screen) ; EXT: + / - ( 6% of Setting + 40mV) ; EXT/ 5: + / - ( 6% of setting + 200mV) f) Edge Trigger : Rising, Falling, Rising & Falling g) Pulse Width Trigger : Trigger ( when > , , 2 ; Delay 1- > 2 d) Cursor Measurement : 1. Voltage Difference between cursors V 2. Time Difference between Cursors T 3. Frequency difference between Cursors 1 T Display a) TFT LCD Type : 7.0 Inch Diagonal Crystal Display b) Display Resolution : 800 x 480 Dots General Specifications a) USB : USB Host / USB Device b) Power Source : AC 100V ~ 240V + / - 10% , 45Hz ~ 440Hz, Auto Selection c) Physical Dimensions : 12.3 x 4.25 x 5.6" inches ( 313 x 108 x 142mm) d) Weight : 4.6lbs ( 2.08Kg)